ZAZ0006 Self-Clean Nano Coating for Stones & Concrete
RM0.00
ZAZ0006 is an advanced single-component, air-dry nano coating jointly developed by AZ Nano Tech and Triz GmbH KG & Co. Ltd., UK. Featuring a fluororesin base with an exceptional penetration capability, this coating is spray-ready and can infiltrate up to 2mm into stone surfaces under ambient conditions. It forms a durable mesh-like waterproof layer that blocks moisture from entering the stone while retaining its natural breathability. This protection significantly enhances the stone's performance, preventing oxidation, discoloration, and mold growth while maintaining its natural appearance and texture.
Quantity
TECHNICAL DATA
Key Features:
- Fast Air Drying: Cures at ambient temperature within 10-20 minutes.
- Superior Hydrophobic and Anti-Stain Effects: Water contact angle reaches up to 150°, with a rolling angle of less than 30°.
- Retains Original Texture: Maintains the stone’s natural appearance and texture without altering its inherent properties.
- High Permeability and Adhesion: Penetrates deep into the stone’s structure while ensuring long-lasting adhesion and breathability.
- Durable Protection: Provides extended resistance to stains, chemical damage, and environmental wear.
- Enhanced Durability: Boosts stone performance, including resistance to acids, detergents, and wear, ensuring lasting protection.
- Safe and Reliable: Non-toxic, environmentally safe, and compliant with national environmental safety standards after curing.
Suitable Materials:
- Stone surfaces
- Concrete and other porous materials
Curing Method:
- Air-dry under normal conditions
Suitable For:
- Waterproofing, oil-proofing and anti-stain treatment for various stone and concrete surfaces
INSTRUCTIONS OF USE
Surface Preparation
- Ensure the substrate surface is thoroughly cleaned and dry, free of any stains or debris.
- Prepare for uniform application by ensuring no contaminants remain on the surface.
Application Method
- Apply the coating using spray or immersion techniques to ensure a uniform layer. Allow the surface to fully absorb the coating until it appears evenly wetted.
- Air Drying: Allow the surface to air dry naturally without exposure to water for at least 6 hours.
- Full Cure: The coating fully cures within 24 hours, providing durable and long-lasting waterproof and anti-stain effects.
Spray Coating Specifications
- Air Pressure: 0.3~0.4 MPa
- Spray Distance: 10~15 cm
Working Conditions
- Temperature Range: 0°C to 40°C
- Relative Humidity: 25%~75% RH
Storage
- Recommended Storage Temperature: Room Temperature
- Shelf Life: 36 months.
Packaging
- 1 kg per container
- 15 kg per container
Environmental
- For safety recommendations and transportation rules, please refer to the SDS.